Vaporesso Luxe Nano Silver
The Vaporesso Luxe Nano Kit is a compact, yet advanced vape kit recommended for the more experienced vaper. Powered by a built-in 2500mAh battery, it is capable of an 80W max output. This is more than enough power to support the 2ml SKRR-S Tank, that features top filling and adjustable airflow.
Small in size, the Luxe Nano is ideal for use on the go, the front panel of the device is taken up by a 1.3 inch TFT full-colour touchscreen. This screen clearly displays output information, battery life, and atomiser resistance, with a simple interface also making it very accessible.
The in-built Omni board 4.2 chipset supplies a recorded 0.002 ramp up time, for a hard-hitting vape. This chip also gives the user access to a range of customisable modes, including Variable Wattage, Variable Voltage, Temperature Control and Bypass. Meaning the Nano can be used with the SKRR-S and other vape tanks.
Variable Wattage Mode is used to directly control power output in Watts, to find that sweet spot between cloud and flavour production. Temperature Control, similarly, allows you to set a wattage output, but also a maximum temperature coil can reach before the device stops firing, in effect, you can programme a short, powerful inhale or a slow, cool one.
The extensive Curve Modes labelled as CCW, CCT and CCV allow you to programme a series of wattages, temperatures or volts that the Nano will then fire at sequentially. This gives you the greatest level of control over the kind of inhale that you'll experience and allows you to find your perfect vape, in terms of flavour and cloud.
Finally, Bypass and SPM have been designed for the advanced vaper. Bypass, draws the maximum amperage from the battery, and power is dictated by the charge of your batteries and the resistance of your coils. SPM, designed for use with rebuildable atomisers, allows you to use coils with a resistance as low as 0.03 Ohm safely up to 80W.
The SKRR-S Tank has been designed for sub ohm vaping, featuring a 2ml capacity; removing the threaded top cap will reveal a generously sized juice port, designed to fit most bottle nibs. The seals on the cap and in the tank greatly reduce leakage.
The triple adjustable airflow allows you complete control over the flow of vapour, affecting both flavour and cloud production. With the wide bore 510 drip tip allowing for a deeper inhale.
The kit comes with a preinstalled Vaporesso QF 0.15 Ohm Strip Coil, that uses Flex Fiber organic cotton wicks and a mesh coil build, that provides clear flavour and increases the lifespan of your coils. Also included is a QF 0.20 Ohm Mesh Coil delivering rapid even heating.
Overall, the Vaporesso Luxe Nano offers users a compact and performance-driven kit, that features advanced modes, a fast ramp-up, and a tank capable of producing your ideal level of flavour and cloud production.
- 1 x Luxe Nano 80W Device
- 1 x SKRR-S 2ml Tank
- 1 x QF Strip 0.15 Ohm Coil (preinstalled)
- 1 x QF Meshed 0.2 Ohm Coil
- 1 x Spare Tank Glass
- 1 x Spares Bag
- 1 x USB Charging Cable
- 1 x User Manual
Nano Mod Features:
- 2500mAh built-in battery
- 5 - 80W output range
- 1.3 Inch Colour Touchscreen
- Omni Board 4.2 Chipset
- Variable Wattage Mode
- Temperature Control Mode
- Curve Mode
- Bypass Mode
- SP Mode
- 510 connection
SKRR-S Tank Features:
- 2ml capacity
- Top filling
- Adjustable triple airflow
- 510 drip tip
- Uses QF sub ohm coils
Important Note About Sub Ohm Vaping:
This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.
We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.